(5) RCA PLENUM-RATED Component AUDIO/VIDEO Cable

Use when you install video systems in commercial environments

Also available in custom lengths – please call 888-519-9505 or email sales@showmecables.com with your request

UL CMP rated jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit

Product Features

Plenum-rated Component Audio/Video Cables are designed to meet stringent building codes for placement of low voltage wiring within a commercial building. The air space above a suspended ceiling or plenum is a common location for runs of low voltage cables. Placement of low voltage cables within the plenum require the installer to use materials that limit the release of smoke and fumes in the unfortunate event of a fire. These plenum-rated component audio video cables are constructed from five precision-machined 75Ohm coaxial cables. They use our precision-machined RCA type connectors featuring  center pins for a solid and reliable connection. CMP-rated PVC jacket and Teflonâ„¢ inner insulators provide the fire protection required to run these cables within walls and air plenums without the need for conduit. The coaxial cables feature 26AWG tinned copper center conductor covered by aluminum polyester tape and 92% tinned copper braid for 100% shield coverage. Features: UL Listed, CMP-rated cable jacket FEP, Teflonâ„¢ inner insulation 26AWG center conductors 92% tinned copper braid shield over foil shield Precision-machined RCA type connectors

Also included with this cable is a connector case for convenient storage of the FireWire® connectors not in use.

Component Video S-Video Adapter for In-focus X1 Projector

Video Adapter for InFocus LP500, LP530, X1, SP4800 Projectors

• Connectors: S-Video male to 3ea. RCA Female (RGB - Red, Green Blue)

RAPIDRUNâ„¢ PC/VIDEO (UXGA) RUNNERâ„¢ CABLE - CL2 RATED
Use in systems where presentation applications using a computer and projector or other large display are the primary functions

Product Features

Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ PC/Video (UXGA) Runner Features: Use in systems where presentation applications using a computer and projector or other large display are the primary functions Color-code: Yellow Compatible with yellow-coded and green-coded Break-Away flying leads and wall plates Constructed from (3) 28AWG 75Ohm coaxial cables, (3) 24 AWG twisted pairs, and (1) 24AWG pair. Coaxial lines feature a 90% shield copper braid for maximum flexibility while protecting against EMI/FRI Overall Mylar foil and 85% shield copper braid CL2-rated for in-wall use PVC jacket is softer and more flexible than any VGA cable you’ve every used Bend radius of less than 3/4in (2) Protective dust caps with pulling eyes rated to 15lb/ft Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RAPIDRUNâ„¢ PC/VIDEO (UXGA) RUNNERâ„¢ CABLE - PLENUM RATED
Use in systems where presentation applications using a computer and projector or other large display are the primary functions

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRunâ„¢, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun'sâ„¢ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runnerâ„¢ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRunâ„¢ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Awayâ„¢ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runnerâ„¢ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRunâ„¢ PC/Video (UXGA) Runner Features: Use in systems where presentation applications using a computer and projector or other large display are the primary functions Color-code: Yellow Compatible with yellow-coded and green-coded Break-Away flying leads and wall plates Constructed from (3) 28AWG 75Ohm coaxial cables, (3) 24 AWG twisted pairs, and (1) 24AWG pair. Coaxial lines feature a 90% shield copper braid for maximum flexibility while protecting against EMI/RFI Overall Mylar foil and 85% shield copper braid CMP rated jacket for use in air plenums and other commercial applications Bend radius of less than 3/4in (2) Protective dust caps with pulling eyes rated to 15lb/ft Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.