Extended Distance SVGA - 3 RCA Component Video Cable (HDTV)

VGA to 3x RCA Component breakout cables are used with video sources or displays that have dual-signal (VGA or Component) Input/output such as scalers and some digital projectors/plasmas.  Our premium-grade cables provide performance at affordable price. 

Please note that breakout cables cannot transcode video signals from VGA to/from Component and can be used in the below instances:Video output device with VGA connector output VGA/Component signal. Video projector/Plamsa VGA input can accept both VGA/Component signal.

• Connectors: HDD15 Male (SVGA/VGA) - 3ea. RCA Male
• 3ea. RG59 conductors with 95% copper braid
• Rubberized flexible jacket
• 24K Gold-Plated Connectors
• Fully-molded RCA Connectors
• 75-Ohm impedance, extended 1GHz bandwidth

NEW!!  RAPIDRUN(TM) S-VIDEO + COMPOSITE VIDEO + STEREO AUDIO BREAK-AWAY FLYING LEAD (1.5 Foot)
Ideal for use with computers, projectors, and any display suporting any combination of S-Video, Composite Video and Stereo Audio

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun(TM), you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's(TM) revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner(TM) base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun(TM) is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away(TM) Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner(TM) base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun(TM) S- Video + Composite Video + Stereo Audio Male Break-Away Flying Lead Features: Color code: Blue For use with RapidRun(TM) HT (5-Coax) Runners (color code blue) Supports transmission of compositet video and S-video over a single run, providing two connections in one! Nickel plated outer connector and pin provides a robust, highly conductive connection Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and composite video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

S-VIDEO/COMPOSITE VIDEO TO VGA CONVERTER WITH TUNER
Turn your LCD or plasma monitor into a Home Theater display!

Product Features

The easy way to integrate S-Video or composite video for your LCD or Plasma screen! The Video to VGA converter accepts an S-Video or composite video source from your DVD player, VCR, camcorder or video game and converts it to VGA for display on your LCD or Plasma screen monitor. The built-in tuner lets you watch television or cable television, providing greater flexibility of your display device. Pass-through function sends video directly to the computer monitor when the unit is powered down. Output resolution is up to 1024X768 for 24 bit RGB true color. Get MTS stereo output via a 3.5mm stereo jack for connection to a PC sound card, or use a "Y" adapter (#03179) and connect to the line in on your home theater receiver. Features: Converts S-Video or RCA composite video to VGA Enables you to use home theater devices, gaming systems, and camcorders with your display device Output resolution up to 1024X768 for 24 bit RGB true color. Pass-through function sends video directly to the computer monitor when the unit is powered down. Provides MTS stereo capabilities for a complete theater experience

RAPIDRUN(TM) COMPONENT VIDEO + S-VIDEO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and component video signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun(TM), you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's(TM) revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner(TM) base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun(TM) is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away(TM) Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner(TM) base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun(TM) Component Video (3-RCA) + S-Video Break-Away Wall Plate Features: Color code: Blue For use with RapidRun(TM) HT (5-Coax) Runners (color code blue) Supports transmission of component video and S-video over a single run, providing two connections in one! Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and component video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RAPIDRUN(TM) COMPONENT VIDEO + S-VIDEO BREAK-AWAY FLYING LEAD (1 Foot)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a S-Video and component video signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun(TM), you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's(TM) revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner(TM) base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun(TM) is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away(TM) Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner(TM) base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun(TM) Component Video (3-RCA) + S-Video Break-Away Flying Lead Features: Color code: Blue For use with RapidRun(TM) HT (5-Coax) Runners (color code blue) Supports transmission of component video and S-video over a single run, providing two connections in one! Nickel plated outer connector provides a robust, highly conductive connection Fully overmolded for additional strain-relief Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a S-Video and component video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

NEW!!  RAPIDRUN(TM) S-VIDEO + COMPOSITE VIDEO + STEREO AUDIO WALL PLATE (White)
Ideal for use with computers, projectors, and any display suporting any combination of S-Video, Composite Video and Stereo Audio

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun(TM), you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's(TM) revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner(TM) base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun(TM) is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away(TM) Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner(TM) base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun(TM) S- Video + Composite Video + Stereo Audio Break-Away Wall Plate Features: Color code: Blue For use with RapidRun(TM) HT (5-Coax) Runners (color code blue) Supports transmission of composite video and S-video over a single run, providing two connections in one! Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and composite video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

V-PLAY VGA TO COMPONENT VIDEO CONVERTER

For HDTV Setup--Converts VGA and RGBHV signals from your PC to Component Video YPbPr

Product Features

Use your computer as a source for your HDTV! This VGA to component video converter is a professional quality scan converter accepting VGA input resolution from 640 x 480 to 1600 x 1200 in 16.7 million-color depth. Convert RGBHV high definition video from set-top satellite receivers and HDTV receivers to component video for connection to your television's YPbPr (HDTV) input. Video can be output as S-Video or composite video for use with VCRs and standard resolution TVs. Switchable output for NTSC or PAL. For the best picture possible, selectable output resolutions are 480i, 480P, 720P, 1080i. This is an external display device and does not require any software for use. Simultaneous display on PC monitor and HDTV/TV. Pass-through function sends video directly to the computer monitor when the unit is powered down. On-screen video adjustments for color, tint, brightness, contrast, sharpness, centering and flicker via infrared remote control. 1:1 analog to digital frame rate sampling. Has horizontal and vertical frequency detection to adjust picture position. Features: Accepts VGA input resolution from 640 x 480 to 1600 x 1200 in 16.7 million-color depth. Switchable output for NTSC or PAL. Selectable output resolutions are 480i, 480P, 720P, 1080i. 1:1 analog to digital frame rate sampling