4 Pair 24 Awg Cat5e Solid Conductor Shielded (PVC)

Specifications:

• 4 Pairs 24 AWG, Solid Shielded Conductors
• 14 dB Minimum ACR @ 100 MHz -- Proven support for Gigabit Ethernet / 1000BASE-T / IEEE 802.3ab, ATM up to 155 Mbps, 100 Mbps Fast Ethernet / 100BASE-T / IEEE 802.3, ANSI.X3.263 FDDI TP-PMD, Ethernet / 10BASE-T / IEEE 802.3, 4 & 16 Mbps Token Ring / IEEE 802.5, T1/E1, xDSL, ISDN, 550 MHz Broadband Video and standards under development such as ATM at 622 Mbps.
• 4 dB Minimum -- Improvement in Near End Crosstalk vs. TIA/EIA 568-B Category 5
• .30 ns/meter Maximum Skew -- Tightly controlled propagation delay
• 100% Teflon® insulation (plenum)
• Engineered for Future Applications -- Tested for all parameters specified...for 4 pair ScTP in TIA/EIA 568-B.2, such as PS-NEXT, Return Loss, ELFEXT and PS-ELFEXT.

DVI Cat-5 Extender with Audio

Our exotendoit DVI Audio Extender extends your DVI and digital/analog audio up to 150 feet away from your HDTV DVI or HDMI source using cost effective CAT-5 cables.

How it works
The DVI Audio Extender sender unit sits next to your video source such as computer, DVD player or any set-top box. The cables supplied with the DVI Audio Extender connect your video source/audio source to the sender. Your display/audio receiver plugs into the back of the DVI Audio Extender receiver. Two CAT-5 cables* connect the sender and the receiver units to each other.

The DVI Audio Extender is HDCP compliant.

Package Includes:

• the DVI Audio Extender Sender
• the DVI Audio Extender Receiver
• One 6 foot DVI cable
• One 6 foot Audio RCA cable
• Two 5V Power Supply
• User's Manual

Features:

• Uses CAT-5* cable for DDC and control signals
• Saves space on your desktop and increases productivity
• Eliminates computer noise where you work
• Supports VESA Standard resolutions and HDTV resolutions
• Supports DDWG standard for DVI compliant monitors
• Supports multichannel digital audio (DTS, Dolby Digital, etc.)
• Supports Digital 7.1
• Supplies clear digital audio over long distances as if connected locally
• Installs in minutes

Specifications:

• Data Transmission Rate: 12.8 Mb/s
• Digital Audio Input/Output: S/PDIF (Digital Coax), Optical TOSlink
• Analog Audio Input/Output: RCA Left and Right
• S/PDIF (Digital Coax): 96 kHz Performance
• Video Amplifier Bandwidth: 1.65 GHz
• Single Link Range:1080P/1920 x 1200
• Input Video Signal:1.2 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
• Input/Output DVI Connector: DVI-I (29 pin) female, Supports ONLY Digital Signals
• Link Connector: RJ-45
• Power Supply: 5VDC
• Power Consumption: 15 Watts (max)
• Dimensions: 2.5" D x 5.5" W x 1" H
• Shipping Weight: 5 Lbs.

* NOTE: A shielded CAT-5e or CAT-6 cable for video is recommended for optimal video quality. The DDC CAT-5 cable does not need to be shielded.