SCSI-3 MD68M (THUMBSCREW) TO SCSI-1 C50M CABLE

Product Features

Ultra SCSI (or SCSI-3), is the latest of the ever improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal, with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. If you need cables for differential Ultra SCSI applications, please call for help since they require different construction techniques.

SCSI DB50 Male/Male Molded Cable

• Available in 3ft. or 6ft. length
• Molded Hoods with thumbscrews
• Double shielded

SCSI 1 CX 50 Male/Male - FAST SCSI C50 CABLE DOUBLE SHEILDED

Designed to achieve faster bus speeds associated with SCSI-2

Connects a SCSI-2 peripheral to either a SCSI-2 bus or another SCSI-2 peripheral

Product Features

SCSI-2 Cables provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and on many newer SCSI peripherals. With a Male-to-Male cable you can connect one peripheral directly to another, or to a SCSI host adapter. Designed with a foil and braid shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedence wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid, perfectly located for easy plug-in and removal, and ensure an on-going, dependable connection. Molded connectors provide strain relief and add additional protection against EMI/RFI interference. Connectors: Micro-Density 50-pin Male to Micro-Density 50-pin Male Cable Type: SCSI-2 Primary Use: Connects a SCSI-2 peripheral to either a SCSI-2 bus or another SCSI-2 peripheral Applications: Scanners, external storage devices and other SCSI-2 peripherals

LVD/SE VHDCI .8mm 68M TO SCSI-3 MD68M (TS) CABLE
Double-shielded Ultra2/Ultra3 LVD/SE external VHDCI cable; .8mm connector

Product Features

VHDCI (Very High-Density Cable Interconnect) SCSI Cables feature 28AWG double-shielded twisted-pair cabling and .8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. The small footprint allows up to four channels to be connected on a single card, and offers excellent shielding against data loss. By creating this improved physical interconnect, connectivity is both more versatile and manageable. VHDCI cables are also referred to as SCSI-V cables. Connectors: External Very High-Density .8mm 68-pin Male to External MD 68-pin Male Twisted-pair conductors ensure that each data line is paired with a ground line to minimize interference Braid and foil shielding reduces EMI/RFI interference ensuring error-free data transfer Designed for: Connects advanced SCSI multiport applications to RAID controllers

 DOUBLE SHIELDED SCSI-1 DB25M/C50M SYSTEM CABLE
 Connects DB25 SCSI port on a PC or Mac to an external SCSI-1 device

Product Features

SCSI-1 Cables provide you with the performance you expect from your SCSI devices. These SCSI-1 cables feature the DB25-pin found on SCSI host adapters on PCs or Macs to a 50-pin Centronics connector most often found on peripherals. With the Male-to-Male cable you can connect one peripheral directly to your SCSI host card. Designed with a foil and braided shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a high quality wire that provides data integrity. Molded connectors provide strain relief and add additional protection against EMI/RFI interference. Connectors: DB25-pin Male to Centronics 50-pin Male Cable Type: SCSI-1 Primary Use: Connecting the DB25 SCSI port on a PC or Mac to an external SCSI-1 device Applications: Scanners, external storage devices and other SCSI-1 peripherals

SCSI-2 MD50M TO SCSI-1 DB25M CABLE
Connects a SCSI-1 peripheral to a SCSI-2 bus or vice-versa

Product Features

SCSI-2 Cables from ShowMeCables provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and a DB25-pin connector found on many peripherals. With a Male-to-Male cable you can connect one peripheral directly to another, or to a SCSI host adapter. Designed with a foil and braid shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedance wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid, perfectly located for easy plug-in and removal, and ensure an on-going, dependable connection. Molded connectors provide strain relief and add additional protection against EMI/RFI interference. Connectors: Micro-Density 50-pin Male to DB-25 Male Cable Type: SCSI-2 Primary Use: Connects a SCSI-1 peripheral to a SCSI-2 bus or vice-versa Applications: Scanners, zip drives, external storage devices and other SCSI-1/2 peripherals

SCSI-2 MD50M TO SCSI-1 C50M CABLE
Connects a SCSI-1 peripheral to a SCSI-2 bus

Product Features

SCSI-2 Cables from ShowMeCables provide you with the performance you expect from your SCSI devices. These SCSI-2 cables feature the Micro-Density 50-pin connector found on Fast SCSI-2 host adapters and Centronics 50-pin connector found on many older peripherals. With a Male-to-Male cable you can connect one peripheral directly to another, or to a SCSI host adapter. Designed with a foil and braid shield overwrapping a twisted-pair construction, providing maximum immunity to EMI/RFI interference combined with a 132 Ohm impedence wire appropriate for faster bus speeds associated with SCSI-2. Shielding of the cable is meticulously handled by soldering 360 degrees from the shielding of the wire to the metal shell which shields the connector. The squeeze latches which fasten the cable to the device are solid, perfectly located for easy plug-in and removal, and ensure an on-going, dependable connection. Molded connectors provide strain relief and add additional protection against EMI/RFI interference. Connectors: Micro-Density 50-pin Male to Centronics 50-pin Male Cable Type: SCSI-2 Primary Use: Connects a SCSI-1 peripheral to a SCSI-2 bus Applications: Scanners, external storage devices and other SCSI-1 peripherals