RAPIDRUNâ„¢ COMPONENT VIDEO + S-VIDEO BREAK-AWAY FLYING LEAD (1 Foot)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a S-Video and component video signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRunâ„¢, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun'sâ„¢ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runnerâ„¢ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRunâ„¢ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Awayâ„¢ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runnerâ„¢ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRunâ„¢ Component Video (3-RCA) + S-Video Break-Away Flying Lead Features: Color code: Blue For use with RapidRunâ„¢ HT (5-Coax) Runners (color code blue) Supports transmission of component video and S-video over a single run, providing two connections in one! Nickel plated outer connector provides a robust, highly conductive connection Fully overmolded for additional strain-relief Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a S-Video and component video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

Component Video S-Video Adapter for In-focus X1 Projector

Video Adapter for InFocus LP500, LP530, X1, SP4800 Projectors

• Connectors: S-Video male to 3ea. RCA Female (RGB - Red, Green Blue)

RAPIDRUNâ„¢ COMPONENT VIDEO + S-VIDEO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and component video signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ Component Video (3-RCA) + S-Video Break-Away Wall Plate Features: Color code: Blue For use with RapidRun™ HT (5-Coax) Runners (color code blue) Supports transmission of component video and S-video over a single run, providing two connections in one! Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and component video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RapidRun™ Integrated Wall Plate (HD15/3.5mm/S-Video/Component Video) – Single Gang Brushed Aluminum
Simultaneously connect pc video, 3.5mm stereo audio, s-video, and component video using one Wall Plate

Product Features

RapidRun&trde; is designed to be the standard for in-wall audio/video installations. The RapidRun system allows for a customized installation to create an ideal audio/video solution. Break-Away Flying Leads and Wall Plates ensure flexible, efficient, high quality connections for all types of equipment. Visit our RapidRun Information Center to learn more about how RapidRun works. The RapidRun Integrated Wall Plates are the perfect solution for educational and institutional installations. The Wall Plates are constructed with aluminum for durability and the locking connector allows the integrator to save valuable space inside the surface mount or electrical box that typically is full of cabling. This particular Wall Plate allows PC Video, 3.5mm Stereo Audio, S-Video, and Component Video to be combined into one convenient location. Break-Away terminations are available in both Flying Leads and Wall Plates and are also available in different lengths and colors to meet the requirements of the installation. Determine the proper setup for your installation by using the RapidRun configurator. Common Applications Education (Learning) and Collaborating - Classroom Setup Transmitting Video from PC to Projector Features: Color Code: Yellow and Blue This Break-Away requires one Multimedia (Blue) and one PC (Yellow) Runner Supports transmission of PC video (UXGA resolution), 3.5mm stereo audio, S-video, and component video Fits a standard single gang J-box Corresponding Flying Leads - (1) HD15 + 3.5mm Stereo Audio Flying Lead and (1) S-Video + 3 RCA (RGB) Flying Lead Please note: To complete the RapidRun System, each Runner will need (2) Flying Leads, (2) Wall Plates, OR (1) Flying Lead and (1) Wall Plate.

RapidRun™ Integrated Wall Plate (HD15/3.5mm/S-Video/Component Video/2 Keystones) – Dual Gang Brushed Aluminum
Simultaneously connect pc video, 3.5mm stereo audio, s-video, and component video using one Wall Plate

RapidRun™ Integrated Wall Plate (HD15/3.5mm/S-Video/Component Video/4 Keystones) – Dual Gang Brushed Aluminum
Simultaneously connect pc video, 3.5mm stereo audio, s-video, and component video using one Wall Plate

Product Features

RapidRun™ is designed to be the standard for in-wall Audio/Video installations. The RapidRun system allows for a customized installation to create an ideal A/V solution. Break-Away Flying Leads and Wall Plates ensure flexible, efficient, high quality connections for all types of equipment. Visit our RapidRun Information Center to learn more about how RapidRun works. The RapidRun Integrated Wall Plates are the perfect solution for educational and institutional installations. The Wall Plates are constructed with aluminum for durability and the locking connector allows the integrator to save valuable space inside the surface mount or electrical box that typically is full of cabling. This particular Wall Plate allows PC Video, 3.5mm Stereo Audio, S-Video, and Component Video to be combined into one convenient location. Four keystone bezels give added flexibility for data and networking support. Break-Away terminations are available in both Flying Leads and Wall Plates and are also available in different lengths and colors to meet the requirements of the installation. Determine the proper setup for your installation by using the RapidRun configurator. Common Applications: Education (Learning) and Collaboration - Classroom Setup Transmitting Video from PC to a Projector Features: Color Code: Yellow and Blue (For use with PC and Multimedia Runners) This Break-Away requires one Multimedia (Blue) and one PC (Yellow) Runner Supports transmission of PC Video (UXGA resolution), 3.5mm Stereo Audio, S-Video, and Component Video Four keystone bezels for data or networking support Fits a standard dual gang J-box Corresponding Flying Leads – (1) HD15 + 3.5mm Stereo Audio Flying Lead and (1) S-Video + 3 RCA (RGB) Flying Lead Please note: To complete the RapidRun system, each Runner will need (2) Flying Leads, (2) Wall Plates, OR (1) Flying Lead and (1) Wall Plate.

MULTI-FUNCTION COMPONENT VIDEO TO SVGA CONVERTER WITH TUNER
Use Your LCD, Plasma or CRT Computer Monitor To Watch HDTV & Component DVD Programming!

Product Features

Easily connect enhanced definition and high definition video devices such as DVD Players, HDTV Satellite Receivers, ATSC HDTV Television Tuners and Advanced Gaming Systems directly to your LCD, Plasma or CRT computer monitor! This scan converter accepts component video (EIA 770.3), S-Video and composite video inputs and outputs them as VGA (RBGHV). Built in cable-ready tuner allows you to watch television on your computer; including displaying TV images as a small PIP (picture-in-picture) on a corner of your monitor desktop! A pass-through function sends the VGA video directly to the monitor when the unit is powered down. Output resolution up to 1024 X 768 with up to 75Hz refresh rate for 24-bit RGB true color display! Features: Converts Component Video, S-Video and Composite Video to SVGA 181 Channel MTS Stereo Cable-Ready Tuner Output Resolution Up To 1024 X 768 @ 75Hz For True 24 Bit RGB Color Plug-and-Play, No Software Required Fully Remote-Controlled, IR Remote Included Designed For The Most Demanding Installations and Applications

Package Contents

Multi-Function Converter Stand Remote Control 5ft VGA Cable 5ft 3.5mm Stereo Audio Cable Power Supply

RAPIDRUNâ„¢ COMPONENT VIDEO + S/PDIF DIGITAL AUDIO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ Component Video + S/PDIF (4-RCA) Break-Away Wall Plate Features: Color code: Blue For use with RapidRun™ HT (5-Coax) Runners (color code blue) Supports transmission of component video and digital coaxial audio over a single run, providing two connections in one! Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

S-VIDEO/COMPOSITE VIDEO TO VGA CONVERTER WITH TUNER
Turn your LCD or plasma monitor into a Home Theater display!

Product Features

The easy way to integrate S-Video or composite video for your LCD or Plasma screen! The Video to VGA converter accepts an S-Video or composite video source from your DVD player, VCR, camcorder or video game and converts it to VGA for display on your LCD or Plasma screen monitor. The built-in tuner lets you watch television or cable television, providing greater flexibility of your display device. Pass-through function sends video directly to the computer monitor when the unit is powered down. Output resolution is up to 1024X768 for 24 bit RGB true color. Get MTS stereo output via a 3.5mm stereo jack for connection to a PC sound card, or use a “Y� adapter (#03179) and connect to the line in on your home theater receiver. Features: Converts S-Video or RCA composite video to VGA Enables you to use home theater devices, gaming systems, and camcorders with your display device Output resolution up to 1024X768 for 24 bit RGB true color. Pass-through function sends video directly to the computer monitor when the unit is powered down. Provides MTS stereo capabilities for a complete theater experience

PROFESSIONAL GRADE SONICWAVE S VIDEO CABLES
Carefully engineered to provide a pure and interference-free conduit for both luminance and chrominance signals

Product Features

Impact Acoustics SonicWave S-Video cables are meticulously crafted to ensure full, accurate and interference-free delivery of critical video signals. Silver-plated oxygen-free copper center conductors and nitrogen-foamed PE dielectric combine with Cu Shielding Technology™ and a 24K gold-plated connector to provide a lifetime of uncompromised performance. The two OFC-braided shields are combined with a 100% Mylar® foil wrap to ensure immunity to environmentally induced noise and to guarantee the full resolution of the video signal is delivered to the downstream component. Precision construction techniques maintain characteristic 75-ohm impedance in both the chrominance and luminance conductor for maximum stability and fidelity. With Impact Acoustics’ SonicWave S-Video interconnects, you will see all the detail your system can deliver. Features: Connectors: 4-pin Male to 4-pin Male Ideal for high performance video sources such as DVD, digital satel