DVI Cabling Explained

There are three types of standards you will see in DVI cables as well as many types of cross over adapter cables. It's important to know how each works and which ones are needed for what you want.

• DVI-I - DVI Integrated (Digital and Analog in One Format)
  
  DVI-I is the most popularly used DVI connection. Any video card out there that does support DVI will more often than not have a DVI-I connection on it. It supports both analog signals and digital signals in one cable. It means that if you have a DVI-I port on your video card your fine hooking up most DVI-D or DVI-A devices without needing a separate adapter. Click Here for a DVI-I Cable

• DVI-D - DVI Digital (True Digital)
  
  DVI-D is a direct digital connection between your video card and your monitor. This type of connection provides a fast transfer rate, high quality image and no quality loss due to the fact that all signals from PC's are purely digital; no digital-analog-digital conversion is needed. Unfortunately, due to the lack in conformity by the monitor and video card industry, this standard is not usually seen in either piece of hardware. (Of the two it's slightly more common on monitors) Click Here for a DVI-D Cable

• DVI-A - DVI Analog (High-Resolution Analog)
  
  This format is used to carry a DVI signal to an analog display. This format is also used to carry a DVI signal to some HDTV's. Some image quality is lost of course due to the conversion process, but the format transmits a picture of higher quality than standard VGA formats. Tthis format is virtually obsolete. We have seen cables for this standard, but no equipment that actually supports it. Click Here for a DVI-A to VGA Cable

Note: None of these cables can be interchanged with other cables. A DVI-D cable cannot be placed on an analog system nor can a DVI-A cable be placed on a digital system. The standards can not be mixed. A DVI-I port however can accept another DVI-I, DVI-D or DVI-A cable

Video Y Splitter Cable Male - Female/Female

• With the Show Me Cables Video Y Splitter Cable you can share video easily.
• It splits the (S)VGA signal providing simultaneous display of the same picture.
• The Video Y Splitter makes connecting two monitors a snap!
• The Video Y Splitter works with any two VGA/SVGA type monitors that use standard 15 pin plugs.
• Perfect for presentations.
• Connections: 1 Male - 2 Females

PREMIUM SHIELDED HD15 M/M SXGA MONITOR CABLE
Premium shielded coax cable for video splitters and KVM switches - VGA, SVGA, XGA, SXGA, UXGA

Standard VGA/SVGA Monitor Cable (Male/Male)

VGA MONITOR CABLE - PREMIUM SHIELDED HD15 Male/Female  (with 45° angled female connector)
Angled 45° connector enables easy installation -- even in the tightest spots!

• Connects VGA output to a variety of high-resolution monitors.
• Color coding for easy identification.
• Red, blue, green, horizontal, and vertical sync.
• Fully braided and shielded.
• DB15HD (three rows of male pins) to 5 BNC connectors.
• Ferrite bead for noise suppression.

2-Port or 4 Port UXGA Monitor Splitter/Extender with Audio
Split your video and audio signal to multiple destinations-- up to 210 feet!

Product Features

The Port Authority2 Audio Video Splitter/Extender is ideal for distributing audio and video to classrooms, exhibits, trade shows, demonstrations, and multimedia presentations. This splitter will broadcast your computer’s audio and video output to multiple destinations. Daisy-chain more than one splitter to expand the number of monitors and speakers you can reach. With the built-in video signal enhancement, you can place monitors up to 210 feet away while maintaining your video quality. From use in test bench facilities, data centers and help desks to video broadcasting, the Port Authority2 Audio Video Splitter/Extender delivers both performance and value. Features: Broadcast your computer’s audio and video outputs to two or four monitors Daisy-chain splitters to expand the number of monitors and speakers Built-in video signal enhancement allows monitors to be placed up to 210 feet away Use the 3.5mm audio outputs to drive either speakers or earphones Supports video resolutions up to 2048x1536 at 60Hz Suitable for VGA, SVGA, XGA, SXGA, UXGA, and Multisync monitors Maximum bandwidth of 400MHz Audio: 50Hz~15KHz, 2.5V p-p, 20K Ohm Input connectors: HD15 Female, 3.5 mm stereo jack Output connectors: 2x HD15 Female, 2x 3.5 mm stereo jack

2-PORT DUAL MONITOR VGA and PS/2 KVM SWITCH
Unleash the power of extended desktop across multiple machines with only 2 monitors!

Product Features

Take advantage of extended desktop functionality in both Windows XP and Mac OS/X with the 2-Port Dual Display VGA KVM from ShowMeCables. It is designed specifically for sharing two VGA monitors between two dual VGA display-enabled computers while using a common keyboard and mouse. Dual display environments are ideal for CAD, graphic design, web development, engineering, accounting - anywhere you need more visibility! The Switch provides complete connectivity for two systems and saves valuable physical workspace by eliminating redundant keyboards, mice, and monitors. The Switch's flexibility extends beyond the display. It supports Microsoft IntelliMouse®, IntelliMouse Explorer®, Logitech NetMouse® and other extended functionality keyboards and mice. Easy system switching via hot-key command or front-panel push button ensures you are in complete control, with a large LED for easy monitoring. Made from metal to protect against EMI/RFI interference, it is also extremely durable. Get the most from your monitors and extended desktop operating systems with the 2-Port Dual Display VGA KVM. Features: PC Port Connectors: Two PS/2 Keyboard 6-pin Mini-Din female Two PS/2 Mouse 6-pin Mini-Din female Four VGA HD15 female Console Port Connectors: One PS/2 Keyboard 6-pin Mini-Din female One PS/2 Mouse 6-pin Mini-Din female Two VGA HD15 female Channel Selection: Push button or hot-key command Numerical LED display: 1 x 7-segment LED Keyboard/Mouse emulation: PS/2 Max Resolution: 1920 x 1440 Hot-plugging PCs for maintenance without powering down the KVM Switch or PCs Plug-and-play, no Windows driver software needed for PS/2 keyboard and PS/2 operation Power: Self-powered PS/2 interface power FCC and CE listed