ULTRA ATA133 EIDE RIBBON CABLE

• Connects two Ultra66/100/133 devices to your motherboard or host controller

Connector Spacing:

• 18 Inch = 0-12-18in
• 24 Inch = 0-18-24in
• 36 inch = 0-24-36in

Product Features

Get the performance you expect from your new UDMA IDE drives by using our Ultra ATA 80-conductor ribbon cables. The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. You will need the next generation of IDE cable to connect the new UDMA hard drives. This 40-pin, 80-conductor cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA EIDE ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females Devices Supported: 2 Cable Type: Type-B Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master Recommended for maximum performance of Ultra66/100/133 drives

USB 2.0 TO IDE DRIVE ADAPTER

Product Features

The USB 2.0 to IDE Drive Adapter implements a bridge between one USB port and one ATA or ATAPI based mass storage device port. The USB 2.0 to IDE Drive Adapter turns any IDE drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The Hi-Speed USB interface provides for easy installation with its plug and play design. The adapter supports all existing IDE/ATAPI devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives. Transfer files to/from your laptop to your desktop quickly and easily: Simply attach your laptop's 2.5in drive to our Laptop to IDE drive adapter (#17705), and connect the Laptop to IDE adapter to this USB 2.0 to IDE drive adapter (#30500). Then plug the USB to IDE adapter into an available USB port on your desktop. Your 2.5in drive will appear as a logical drive, enabling you to pull files directly back and forth. Connectors: USB A port to IDC 40-pin female Fully compliant with BOTH the Standard Specification of USB 2.0 & USB 1.1 High-Speed up to 480 Mbps data transfer rate Integrated USB Transceiver Supports USB Suspend/Resume and Remote Wake-up Supports Self-Powered Mode using included AC adapter USB Mass Storage Class compliant with Bulk Specification only

IDE 44P + 4P Power Front Panel Bracket

Equivalent Molex 4P & IDE(ATA) connectors for easy to connect in case outside

• Power 4P connector
• IDE connector
• 3.5' Bay chassis

32in UNIVERSAL FLAT RIBBON FLOPPY DRIVE CABLE
  Connects two floppy drives to your motherboard or host controller

Product Features

Connect almost any floppy drive to your controller with the Universal Floppy Drive Cable. The Universal Floppy Drive Cable features two connectors, a 34-pin edgecard and a 34-pin socket, and is designed for drive A and drive B locations. Floppy Drive Cables are designed to work with 3-1/2in floppy drives, 5-1/4in floppy drives and older tape back-up drives. Connectors: 2 x 34-pin edgecard; 2 x 34-pin socket 3-1/2in and 5-1/4in Floppy Drive compatible Number of Connections: 4 (2 each for 3-1/2in and 5-1/4in drives) Connection Spacing: 0-16-19-29-32in Application: Connects internal floppy devices to internal controller Designed for: Data transfer and floppy device control

DUAL IDE DRIVE CABLE

• Connect two IDE Devices to your motherboard or host controller

Connector Spacing:

• 19 Inch = 0-12-19 inch
• 24 Inch = 0-16-24 inch
• 36 Inch = 0-24-36 inch

Product Features

Easily connect your IDE device to your motherboard or host controller. Each cable features 40-pin socket-to-socket connections and meets or exceeds all industry specifications. IDE ribbon cables are designed for use with Ultra33 and other IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Connectors: 40-wire/40-pin IDC Female to Two 40-wire/40-pin IDC Females Devices Supported: 2 Cable Type: IDE/EIDE

2 1/2in IDE to 3 1/2in IDE Drive SCSI Adapter

Want to use your laptop HD on your PC? Convert it! This is a 44-pin laptop to 4-pin Molex power adapter and 40-pin IDE converter.

• High-performance materials optimize electrical conductivity.

40 Pin IDE Cable - Single Device

These high quality, internal PVC jacketed IDE cables allow you to easily connect your high performance hard drive, CD-ROM, CD-RW, DVD-ROM, DVD-RW drive or any other device that requires an IDC 40 Pin connection to a IDE controller card.

Features

High quality Internal single IDE Hard drive ribbon cable

Fully tested and certified to meet or exceed industry standards

Allows one internal IDE hard drive to be connected to a controller card

Red line on side to indicate pin one.



Specifications
40 pin/ 40 conductor cable.
1 female drive and 1 female controller connection

$.99 CENTS FOR A LIMITED TIME ONLY!

2 1/2in IDE to 3 1/2in IDE Drive Converter With Mounting Kit

Want to use your laptop HD on your PC? Convert it! This kit includes drive bay mounting brackets, screws, and a 44-pin laptop to 4-pin Molex power adapter and 40-pin IDE converter.

• Durable and sturdy metal mounting kit helps prolong drive life.
• High-performance materials optimize electrical conductivity.

LAPTOP TO IDE HARD DRIVE ADAPTER

Product Features

With the Laptop Hard Drive Adapter, you can easily connect your 2.5in notebook IDE hard drive to a 40-pin IDE cable for installation in a desktop or tower PC. Each adapter features 44-pin female to 40-pin male connectors, and a power feed. Transfer files to/from your laptop to your desktop quickly and easily: Simply attach your laptop's 2.5in drive to this adapter, and connect the adapter to our USB 2.0 to IDE drive adapter (#30500). Then plug the USB to IDE adapter into an available USB port on your desktop. Your 2.5in drive will appear as a logical drive, enabling you to pull files directly back and forth. Connectors: 44-pin Female to 40-pin IDC Male Use: Connects your 2.5in notebook IDE hard drive to a 40-pin IDE cable

AUDIO CABLE SOUND BLASTER TO IDE CD ROM FOR ALL QUAD SPEED (2 Foot)

Special pricing: $.99 – regular price $2.99 – While supplies last

SOUND BLASTER / CD ROM AUDIO CABLE:  SONY, MITSUMI, TEXEL, PLEXTOR, NEC, & PANASONIC

ATA-100 IDE RIBBON CONNECTOR