Flat Ribbon Cable (Price per Foot)

Available in 10, 20, 34, 50 & 60 Conductor Sizes

• .05" conductor spacing to align to IDC connectors
• Stranded 28 AWG 105 degree 300 volt insulation
• Gray PVC insulation

36 PIN FEMALE CENTRONICS CONNECTOR FOR FLAT RIBBON CABLE

• IDC TYPE

36 PIN MALE CENTRONICS CONNECTOR FOR FLAT RIBBON CABLE

• IDC TYPE

• For IDC type connector
• Crimping Distance 6 ~ 27mm 9.50' long

MOLDED ROUND 2-DEVICE FLOPPY DRIVE CABLE

• Connects two floppy drives to your motherboard or host controller
• Available in Black, Red or Blue

Product Features

Connect any 3.5in floppy drive to your controller with the Molded Round Floppy Drive. The slimline design reduces internal cable clutter for a clean, professional look. This slim profile will reduce overheating by allowing more air flow inside your case. The flexibility of the floppy cable makes them easier to install and fasten down with cable ties. The Molded Round Floppy Drive Cable features two 34-pin drive connectors and is designed for drive A and drive B locations. It is designed to work with 3.5in floppy drives and older tape back-up drives. Connectors: 3 x 34-pin IDC Number of Connections: 3 Application: Connects internal floppy devices to internal controller Designed for: Data transfer and floppy device control Reduce overheating and save internal space Easier to install than flat ribbon cables Ideal for 1U servers and gaming/overclocked systems

32in UNIVERSAL FLAT RIBBON FLOPPY DRIVE CABLE
  Connects two floppy drives to your motherboard or host controller

Product Features

Connect almost any floppy drive to your controller with the Universal Floppy Drive Cable. The Universal Floppy Drive Cable features two connectors, a 34-pin edgecard and a 34-pin socket, and is designed for drive A and drive B locations. Floppy Drive Cables are designed to work with 3-1/2in floppy drives, 5-1/4in floppy drives and older tape back-up drives. Connectors: 2 x 34-pin edgecard; 2 x 34-pin socket 3-1/2in and 5-1/4in Floppy Drive compatible Number of Connections: 4 (2 each for 3-1/2in and 5-1/4in drives) Connection Spacing: 0-16-19-29-32in Application: Connects internal floppy devices to internal controller Designed for: Data transfer and floppy device control

Black Flat Coiled Handset Cord

• UL Certified and meets FCC Part 68 Requirements
• Flat Flame retardant PVC Jacket
• 50 Micron Gold Plated Contacts
• Stranded Tinsel Ribbon Conductor
• 1.5 Inch flat lead on each end

Black Flat is compatible with many manufacturers including:

Vodavi 2701, 2703, 2705, 2706 caller ID, Trillium, Nortel Meridian - M2600, M2008, M2008HF, M2250, M2317, M2616, M2616ACD, M3901, M3902, M3902, M3904 

Why is a 6 foot handset cord only about 12 – 16 inches of curled length?

6, 12 & 25 ft. are EXTENDED lengths when the cables are outstretched. 

Please keep in mind that this is not the “curled� length.

If you have any questions or need custom colors or lengths, please call us at 888-519-9505

Grey Coiled Handset Cord

• UL Certified and meets FCC Part 68 Requirements
• Flat Flame retardant PVC Jacket
• 50 Micron Gold Plated Contacts
• Stranded Tinsel Ribbon Conductor
• 1.5 Inch flat lead on each end

Grey Color (also called Dolphin Grey) is compatible with many manufacturers including:

Northern Telecom Grey, Norstar, Panansonic DBS Grey