SC/ST MODE-CONDITIONING FIBER PATCH CABLE
For use in Gigabit Ethernet 1000BASE-LX applications

Product Features

Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. Custom lengths are available - just give us a call at 888-519-9505. Mode: 62.5/125um IEEE-802.3z (Gigabit Ethernet) Compliant Masks Differential Mode Delay (DMD) effects Use in place of standard equipment-to-cable plant patch cord

LC/SC MODE-CONDITIONING FIBER PATCH CABLE
For use in Gigabit Ethernet 1000BASE-LX applications

Product Features

Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. Custom lengths are available - just give us a call at 888-519-9505. Mode: 62.5/125um IEEE-802.3z (Gigabit Ethernet) Compliant Masks Differential Mode Delay (DMD) effects Use in place of standard equipment-to-cable plant patch cord

10Gb LC/LC Duplex 50/125 Multimode Fiber Patch Cable
Laser-optimized 50 micron "Aqua fiber" for LED/VCSEL laser light sources and 10-Gigabit applications.

Product Features

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Show Me Cables. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. Note: Custom lengths are available; just click here for a custom fiber quote. Features: Fully compatible with 50/125 multimode fiber applications Use with both LED and VCSEL laser light sources Designed for use in 10-Gigabit ethernet applications Lifetime warranty against defects of materials and workmanship Specifications: Connectors: (2) LC to (2) LC Type: Laser-Optimized 50/125 Multimode Duplex Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm 10 Gigabit transfers up to 300m using 850nm VCSEL source Jacket material: PVC (OFNR-rated) Jacket color: Aqua

10Gb LC/SC Duplex 50/125 Multimode Fiber Patch Cable
Laser-optimized 50 micron "Aqua fiber" for LED/VCSEL laser light sources and 10-Gigabit applications.

10Gb SC/SC Duplex 50/125 Multimode Fiber Patch Cable
Laser-optimized 50 micron "Aqua fiber" for LED/VCSEL laser light sources and 10-Gigabit applications.

Product Features

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Show Me Cables. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. Note: Custom lengths are available; just click here for a custom fiber quote. Features: Fully compatible with 50/125 multimode fiber applications Use with both LED and VCSEL laser light sources Designed for use in 10-Gigabit ethernet applications Lifetime warranty against defects of materials and workmanship Specifications: Connectors: (2) LC to (2) SC Type: Laser-Optimized 50/125 Multimode Duplex Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm 10 Gigabit transfers up to 300m using 850nm VCSEL source Jacket material: PVC (OFNR-rated) Jacket color: Aqua

10Gb ST/ST Duplex 50/125 Multimode Fiber Patch Cable
Laser-optimized 50 micron "Aqua fiber" made in the USA

10Gb ST/SC Duplex 50/125 Multimode Fiber Patch Cable
Laser-optimized 50 micron "Aqua fiber" made in the USA

Product Features

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Show Me Cables. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. Note: Custom lengths are available; just click here for a custom fiber quote. Features: Fully compatible with 50/125 multimode fiber applications Use with both LED and VCSEL laser light sources Designed for use in 10-Gigabit ethernet applications Lifetime warranty against defects of materials and workmanship Specifications: Connectors: (2) ST to (2) SC Type: Laser-Optimized 50/125 Multimode Duplex Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm 10 Gigabit transfers up to 300m using 850nm VCSEL source Jacket material: PVC (OFNR-rated) Jacket color: Aqua

10Gb LC/ST Duplex 50/125 Multimode Fiber Patch Cable
Laser-optimized 50 micron "Aqua fiber" made in the USA

Product Features

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Show Me Cables. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. Note: Custom lengths are available; just click here for a custom fiber quote. Features: Fully compatible with 50/125 multimode fiber applications Use with both LED and VCSEL laser light sources Designed for use in 10-Gigabit ethernet applications Lifetime warranty against defects of materials and workmanship Specifications: Connectors: (2) LC to (2) ST Type: Laser-Optimized 50/125 Multimode Duplex Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm 10 Gigabit transfers up to 300m using 850nm VCSEL source Jacket material: PVC (OFNR-rated) Jacket color: Aqua

MODE-CONDITIONING SC/SC PATCH CABLE
For use in Gigabit Ethernet 1000BASE-LX applications

Product Features

Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. Custom lengths are available - just give us a call at 888-519-9505. Mode: 62.5/125um IEEE-802.3z (Gigabit Ethernet) Compliant Masks Differential Mode Delay (DMD) effects Use in place of standard equipment-to-cable plant patch cord

Panduit Mini-Com® Angled Modular Faceplate Patch Panels

• Angled design allows cable to flow to each side of the rack and eliminates the need for horizontal cable managers by enabling patch cords to be routed directly into vertical cable managers
• Allow labeling scheme and port identification to be visible at all times
• Allow front access to installed modules for easy moves, adds and changes
• Accept Mini-Com® Modules for UTP (including Category 5e and Category 6), Fiber Optic and Coax, which snap in and out for easy moves, adds and changes
• Mount to standard TIA/EIA 19" rack or 23" racks with optional extender bracket
• Compatible with PatchRunner™ Network Cable Management System