5' CAT 5e Cross-Over Ethernet Patch Cable

Available in Grey, Black, Blue, Green, Orange, Yellow, Red, and White

25' CAT 5e Cross-Over Ethernet Patch Cable

Available in Grey, Black, Blue, Green, Orange, Yellow, Red, and White

10' RED CAT 5e Cross-Over Ethernet Patch Cable

Special $2.99/ea., Regular price $4.75

Commonly used for hub-to-hub, transceiver-to-transceiver or repeater-to-repeater ethernet connections. In addition, connect two Windows-based computers in a Peer-to-Peer Networking configuration.

3' RED CAT 5e Cross-Over Ethernet Patch Cable

Special $1.75/ea., Regular price $2.75

Commonly used for hub-to-hub, transceiver-to-transceiver or repeater-to-repeater ethernet connections. In addition, connect two Windows-based computers in a Peer-to-Peer Networking configuration.

50' CAT 5e Cross-Over Ethernet Patch Cable

Available in Grey, Black, Blue, Green, Orange, Yellow, Red, and White

100' CAT 5e Cross-Over Ethernet Patch Cable

Available in Grey, Black, Blue, Green, Orange, Yellow, Red, and White

MODE-CONDITIONING SC/SC PATCH CABLE
For use in Gigabit Ethernet 1000BASE-LX applications

Product Features

Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. Custom lengths are available - just give us a call at 888-519-9505. Mode: 62.5/125um IEEE-802.3z (Gigabit Ethernet) Compliant Masks Differential Mode Delay (DMD) effects Use in place of standard equipment-to-cable plant patch cord

LC/SC MODE-CONDITIONING FIBER PATCH CABLE
For use in Gigabit Ethernet 1000BASE-LX applications

Product Features

Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. Custom lengths are available - just give us a call at 888-519-9505. Mode: 62.5/125um IEEE-802.3z (Gigabit Ethernet) Compliant Masks Differential Mode Delay (DMD) effects Use in place of standard equipment-to-cable plant patch cord

SC/ST MODE-CONDITIONING FIBER PATCH CABLE
For use in Gigabit Ethernet 1000BASE-LX applications

Product Features

Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. Custom lengths are available - just give us a call at 888-519-9505. Mode: 62.5/125um IEEE-802.3z (Gigabit Ethernet) Compliant Masks Differential Mode Delay (DMD) effects Use in place of standard equipment-to-cable plant patch cord

 

3' CAT 5e Cross-Over Ethernet Patch Cable Available in Grey, Black, Blue, Green, Orange, Yellow, Red, and White Commonly used for hub-to-hub, transceiver-to-transceiver or repeater-to-repeater ethernet connections. In addition, connect two Windows-based computers in a Peer-to-Peer Networking configuration.
Humpday Special: 3' Cat5e Cross-Over Ethernet Patch Cables Only $1.99! For a Limited Time only!

Belden RG58 Thinnet 10Base2 Ethernet Coaxial Cable

Description

• Coaxial Cable
• Coaxial RG/U Type:58A
• Impedance:50ohm
• Conductor Size AWG:20
• No. Strands x Strand Size:19 x 32
• Jacket Material:Polyvinylchloride (PVC)
• Conductor Material:Copper
• Jacket Color:Light Gray
• RoHS Compliant: Yes

SC/ST 50/125 Multimode Duplex Fiber Patch Cable