DIGITAL AUDIO COAX INTERCONNECT PATCH CABLE
Designed to carry the digital audio stream from a CD transport, DVD player, DAT deck or other digital component to an A/V receiver digital input or the input of an outboard D/A converter

Product Features

Digital Audio Coax Interconnect Patch Cables are a great upgrade from the cables typically included with consumer electronics products. Low-loss 75ohm oxygen-free copper center conductors and foam dielectric provides improved sound quality and performance. The 100% aluminum foil and dual OFC braid shields protect against unwanted noise and interference. Robustly designed molded connectors combine with an ultra-flexible jacket, and allow for easy installation and identification. The 24K gold plated, durable connectors ensure long-lasting performance. Features: Connectors: RCA Male to RCA Male 75-ohm oxygen-free copper center conductor delivers high-quality digital audio 24K gold-plated connectors ensure long-lasting quality Fully molded connectors provide excellent strain relief Aluminum foil and oxygen-free copper braided shields provide clear, noise-free, vivid sound Ultra-flexible PVC jacket for easy installation Made from UL 2919 listed cable Extended Distance 50, 75 & 100 Foot Cables Feature:

• Precision manufactured 75-ohm coaxial digital audio cable
• Silver-plated, large cross-section, oxygen-free copper conductor
• Cu Shielding Technologyâ„¢ features three layers of shielding: two 80%+ OFC copper braids and one 100% overlapped Mylar® foil
• SplitLokâ„¢ precision-machined 24-karat gold-plated connectors with split center pins ensure superior signal transfer
• Silver solder construction eliminates the negative effects of dissimilar metals on the delicate digital signal
• Flexcableâ„¢ ultra-flexible PVC jacket for easy installation

Digital Audio Extender

Extends S/PDIF and TOSlink digital audio devices up to 100 meters(330 feet).

Place your digital audio components anywhere you want with Gefen’s Digital Audio Extender. It supports either S/PDIF or TOSlink digital audio signals, which are commonly used to transmit stereo and multichannel (7.1, DTS, Dolby Digital, etc.) digital audio among various components.

The Digital Audio Extender uses a sender and receiver system connected by CAT-5E cables to extend the digital audio.
How it works
The Digital Audio Extender’s sender unit connects to the audio source component. The Digital Audio Extender’s receiver unit connects to the extended audio component (up to 330 feet away). One CAT-5E cable connects the sender to the receiver.

Package Includes:

• Digital Audio Extender-S
• Digital Audio Extender-R
• One TOSlink fiber optic cable
• 5V external power supply

Features:

• Extends any S/PDIF and TOSlink digital audio device up to 330 feet from the source
• Supports multichannel digital audio (DTS, Dolby Digital, etc.)
• Supports Digital 7.1
• Supplies clear digital audio over long distances as if connected locally
• Power is only required at the sending side
• Streamlines audio installations by allowing source devices to be located in off-site or unseen rack
• Plug and play system
• One CAT-5 cable used for extension
• Installs in seconds

Specifications:

RAPIDRUNâ„¢ COMPONENT VIDEO + S/PDIF DIGITAL AUDIO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ Component Video + S/PDIF (4-RCA) Break-Away Wall Plate Features: Color code: Blue For use with RapidRun™ HT (5-Coax) Runners (color code blue) Supports transmission of component video and digital coaxial audio over a single run, providing two connections in one! Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

DVI Cat-5 Extender with Audio

Our ex•tend•it DVI Audio Extender extends your DVI and digital/analog audio up to 150 feet away from your HDTV DVI or HDMI source using cost effective CAT-5 cables.

How it works
The DVI Audio Extender sender unit sits next to your video source such as computer, DVD player or any set-top box. The cables supplied with the DVI Audio Extender connect your video source/audio source to the sender. Your display/audio receiver plugs into the back of the DVI Audio Extender receiver. Two CAT-5 cables* connect the sender and the receiver units to each other.

The DVI Audio Extender is HDCP compliant.

Package Includes:

• the DVI Audio Extender Sender
• the DVI Audio Extender Receiver
• One 6 foot DVI cable
• One 6 foot Audio RCA cable
• Two 5V Power Supply
• User's Manual

Features:

• Uses CAT-5* cable for DDC and control signals
• Saves space on your desktop and increases productivity
• Eliminates computer noise where you work
• Supports VESA Standard resolutions and HDTV resolutions
• Supports DDWG standard for DVI compliant monitors
• Supports multichannel digital audio (DTS, Dolby Digital, etc.)
• Supports Digital 7.1
• Supplies clear digital audio over long distances as if connected locally
• Installs in minutes

Specifications:

• Data Transmission Rate: 12.8 Mb/s
• Digital Audio Input/Output: S/PDIF (Digital Coax), Optical TOSlink
• Analog Audio Input/Output: RCA Left and Right
• S/PDIF (Digital Coax): 96 kHz Performance
• Video Amplifier Bandwidth: 1.65 GHz
• Single Link Range:1080P/1920 x 1200
• Input Video Signal:1.2 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
• Input/Output DVI Connector: DVI-I (29 pin) female, Supports ONLY Digital Signals
• Link Connector: RJ-45
• Power Supply: 5VDC
• Power Consumption: 15 Watts (max)
• Dimensions: 2.5â€� D x 5.5â€� W x 1â€� H
• Shipping Weight: 5 Lbs.

* NOTE: A shielded CAT-5e or CAT-6 cable for video is recommended for optimal video quality. The DDC CAT-5 cable does not need to be shielded.

RAPIDRUNâ„¢ HT (5-COAX) RUNNERâ„¢ CABLE
Designed for audio/video applications, such as a home theater installation or a multi-room A/V hookup

Product Features

Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ HT (5-Coax) Runner Features: Designed for audio/video applications, such as a home theater installation or a multi-room A/V hookup Color-code: Blue Compatible with blue-coded and green-coded Break-Away flying leads and wall plates Constructed from (5) 28AWG 75Ohm mini coaxial cables Coaxial lines feature a 90% shield copper braid for maximum flexibility while protecting against EMI/RFI For in-wall use in conduit PVC jacket is softer and more flexible than any VGA cable you’ve every used Bend radius of less than 3/4in (2) Protective dust caps with pulling eyes rated to 15lb/ft Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RAPIDRUNâ„¢ HT (5-COAX) RUNNERâ„¢ CABLE - PLENUM RATED
Designed for audio/video applications, such as a home theater installation or a multi-room A/V hookup

RAPIDRUNâ„¢ COMPOSITE VIDEO + STEREO AUDIO BREAK-AWAY FLYING LEAD (1 Foot)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRunâ„¢, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun'sâ„¢ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runnerâ„¢ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRunâ„¢ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Awayâ„¢ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runnerâ„¢ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRunâ„¢ Composite Video + Stereo Audio (3-RCA) Break-Away Flying Lead Y/R/W Features: Color code: Green For use with RapidRunâ„¢ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue) Connector color coded yellow for composite video and red/white for dual channel audio Fully overmolded for additional strain-relief Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RAPIDRUNâ„¢ S-VIDEO + STEREO AUDIO BREAK-AWAY FLYING LEAD (1 Foot)Ideal for use with receivers, projectors, HDTVs, computers, and any application where an S-Video and dual channel audio signal is desired

RAPIDRUNâ„¢ COMPOSITE VIDEO + STEREO AUDIO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ Composite Video + Stereo Audio (3-RCA) Break-Away Wall Plate Y/R/W Features: Color code: Green For use with RapidRun™ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue) Supports transmission of composite video and stereo analog audio signals Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RAPIDRUNâ„¢ S-VIDEO + STEREO AUDIO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where an S-Video and dual channel audio signal is desired

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ S-Video + Stereo Audio (2-RCA) Break-Away Wall Plate Features: Color code: Green For use with RapidRun™ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue) Supports transmission of S-Video and stereo analog audio Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where an S-Video and dual channel audio signal is desired Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RapidRunâ„¢ S-Video + 3.5mm Stereo Audio Break-Away Wall Plate - White

Ideal for use with receivers, projectors, HDTVs, computers, and any application where an S-Video and audio signal is desired

Product Features

RapidRun modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The amazing RapidRun connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ S-Video + Stereo Audio (3.5mm) Break-Away Wall Plate Features: Color code: Green For use with RapidRun™ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue) Supports transmission of S-Video and stereo analog audio Fits into a standard J-box Compatible with Leviton Decora® brand cover plates Ideal for use with receivers, projectors, HDTVs, computers, and any application where an S-Video and dual channel audio signal is desired Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate. Decora® is a registered trademark of Leviton Manufacturing Company, Inc. This product is not manufactured or endorsed by the Leviton Manufacturing Company, Inc. * RapidRun runner cables are designed to pull through 3/4in conduit including pre-manufactured 90 degree sweeps. 90 degree, 3/4in conduit sweeps bent by installers in the field may have smaller diameters than pre-manufactured sweeps, resulting in pulling diameter reductions of 15% or more.