Clearance Items
|
Did you find this search useful?
Yes
No
|
|
S VIDEO+AUDIO to 3 RCA ADAPTER CABLE
S VIDEO+AUDIO to 3 'RCA' ADAPTER CABLE
Connect your s-video/audio out on your PC to composite RCA on TV or receiver
| Product Features | The S-Video+Audio to 3 RCA Adapter Cable allows you to connect your multimedia PC to your television with ease. This precision-engineered adapter cable connects the S-Video out of your computer to a TV, thus eliminating the need for several cables and/or adapters. This bi-directional cable converts S-Video to composite RCA or vice-versa without an expensive active converter. This quality 75ohm coax cable is double-shielded with 85% aluminum foil and braid to reduce unwanted noise and distortion. The Y/C signal separation circuitry provides a bright, crisp picture from your PC. In addition to fitting standard S-Video jacks, the cable fits both 7-pin and 4-pin jacks on desktops and notebooks with a TV out jack. Ordinary, 'included in the box' S-video and composite RCA cables often use low-quality materials with inferior shielding that can result in poor sound and picture quality. - Connectors: S-Video Male and 3.5mm Plug to 3 RCA Plug
- Convert from composite S-Video to RCA or vice-versa
- One piece solution, which eliminates couplers that cause signal loss
- Fully molded connectors provide excellent strain relief
- High-quality 75ohm aluminum foil and braid shielded coaxial cable delivers outstanding picture clarity
- 24AWG 90% spiral-wrapped copper shielded wire provides shielding against EMI and RFI interference
- PVC flexible jacket for easy installation
- Y/C signal separation circuitry provides a bright, crisp picture
- Color-coded connectors: yellow, green, red, white
- Portable lightweight design makes it ideal for laptops
- NTSC and PAL compatible
|
|
|
|
|
|
USB Audio/Video Capture Cable
USB Audio/Video Capture Cable Ideal way to bring live audio/video and still image into your computer from various standard video sources.
Convert Analog Audio/Video signal to Digital through USB - Capture Rate up to 30fps at 320x240(NTSC) & 25fpc at 352x288 (PAL)
- Video capture size: 160x120, 176x144, 240x180, 320x240, 352x288
- 640x480 resolution still image capature
- Support composite S-Video input, NTSC, PAL & SECAM system
- Stereo audio input to make best audio video synchronization
- Support brightness, contrast, hue, saturation control
- High quality video compressor to speed up video frame rate
- Low CPU utilization at decompression
- Windows 98/2000/Me/XP driver support
- Plug & play
- USB 2.0 Compatible
|
|
|
|
|
4ft iPOD® COMPATIBLE 3.5mm to RCA AUDIO/VIDEO CABLE
4ft iPOD® COMPATIBLE 3.5mm to RCA AUDIO/VIDEO CABLE
Conveniently connect your Apple® iPod® to your stereo, television, or docking station
| Product Features | The iPod® Compatible 3.5mm to RCA Audio/Video Cable allows you to play music, photos, and video from your iPod through your home entertainment system. Using your iPod’s headphone jack to get audio and video out to your stereo or television frees up your dock connector allowing you to charge your iPod at the same time. The iPod Compatible 3.5mm to RCA Audio/Video Cable is also ideal for use with your docking station’s 3.5mm output. - Connect your iPod to your stereo, television, or docking station
- Frees up your dock connector port allowing you to enjoy your iPod media while still being able to charge
- Approximately four feet long
- Light-weight construction is ideal for travel
- Compatible with the iPod Photo® and iPod Video®
Apple®, iPod®, and Firewire® are registered trademarks of Apple Computer, Inc. This product is not manufactured or endorsed by Apple Computer, Inc. |
|
|
|
|
|
NEW!! RAPIDRUN™ S-VIDEO + COMPOSITE VIDEO + STEREO AUDIO BREAK-AWAY FLYING LEAD (1 Foot)
NEW!! RAPIDRUN™ S-VIDEO + COMPOSITE VIDEO + STEREO AUDIO BREAK-AWAY FLYING LEAD (1.5 Foot)
Ideal for use with computers, projectors, and any display suporting any combination of S-Video, Composite Video and Stereo Audio | Product Features | Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!
RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.
The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate.
RapidRun™ S- Video + Composite Video + Stereo Audio Male Break-Away Flying Lead Features: - Color code: Blue
- For use with RapidRun™ HT (5-Coax) Runners (color code blue)
- Supports transmission of compositet video and S-video over a single run, providing two connections in one!
- Nickel plated outer connector and pin provides a robust, highly conductive connection
- Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and composite video signal are desired in a single cable run
Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate. |
|
|
|
|
|
NEW!! RAPIDRUN™ S-VIDEO + COMPOSITE VIDEO + STEREO AUDIO WALL PLATE (White)
NEW!! RAPIDRUN™ S-VIDEO + COMPOSITE VIDEO + STEREO AUDIO WALL PLATE (White)
Ideal for use with computers, projectors, and any display suporting any combination of S-Video, Composite Video and Stereo Audio | Product Features | Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!
RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.
The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate.
RapidRun™ S- Video + Composite Video + Stereo Audio Break-Away Wall Plate Features: - Color code: Blue
- For use with RapidRun™ HT (5-Coax) Runners (color code blue)
- Supports transmission of composite video and S-video over a single run, providing two connections in one!
- Fits into a standard J-box
- Compatible with Decora® brand cover plates Click here for wallplates
- Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and composite video signal are desired in a single cable run
Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.
|
|
|
|
|
|
RAPIDRUN™ COMPOSITE VIDEO + STEREO AUDIO BREAK-AWAY FLYING LEAD (1 Foot)
RAPIDRUN™ COMPOSITE VIDEO + STEREO AUDIO BREAK-AWAY FLYING LEAD (1 Foot)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run | Product Features | Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!
RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.
The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate.
RapidRun™ Composite Video + Stereo Audio (3-RCA) Break-Away Flying Lead Y/R/W Features: - Color code: Green
- For use with RapidRun™ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue)
- Connector color coded yellow for composite video and red/white for dual channel audio
- Fully overmolded for additional strain-relief
- Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run
Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate. |
|
|
|
|
|
RAPIDRUN™ COMPONENT VIDEO + S/PDIF DIGITAL AUDIO BREAK-AWAY FLYING LEAD (1 Foot)
RAPIDRUN™ COMPONENT VIDEO + S/PDIF DIGITAL AUDIO BREAK-AWAY FLYING LEAD (1 Foot)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run
| Product Features | Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!
RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.
The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate.
RapidRun™ Component Video + S/PDIF (4-RCA) Break-Away Flying Lead Features: - Color code: Blue
- For use with RapidRun™ HT (5-Coax) Runners (color code blue)
- Supports transmission of component video and S/PDIF Digital Coax Audio over a single run, providing two connections in one!
- Nickel plated outer connector provides a robust, highly conductive connection
- Fully overmolded for additional strain-relief
- Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run
Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate. |
|
|
|
|
|
RAPIDRUN™ COMPOSITE VIDEO + STEREO AUDIO WALL PLATE (White)
RAPIDRUN™ COMPOSITE VIDEO + STEREO AUDIO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run | Product Features | Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!
RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.
The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate.
RapidRun™ Composite Video + Stereo Audio (3-RCA) Break-Away Wall Plate Y/R/W Features: - Color code: Green
- For use with RapidRun™ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue)
- Supports transmission of composite video and stereo analog audio signals
- Fits into a standard J-box
- Compatible with Decora® brand cover plates Click here for wallplates
- Ideal for use with receivers, projectors, HDTVs, computers, and any application where composite video and dual channel audio are desired in a single cable run
Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.
|
|
|
|
|
|
RapidRun™ S-Video + Stereo Audio V.2 Break-Away Flying Lead
RapidRun™ S-Video + Stereo Audio V.2 Break-Away Flying Lead
Ideal for use with receivers, projectors, HDTVs, computers, and any application where an S-Video and dual channel audio signal is desired | Product Features | RapidRun's new V.2 Flying Leads with 24 Karat gold plated connectors, distinctive RapidRun overmold and subtle design makes this modular cabling system truly live up to every customer's expectations.
RapidRun modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!
RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.
The key to this RapidRun™ is our proprietary connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The amazing RapidRun connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate.
RapidRun™ S-Video + Stereo Audio (2-RCA) Break-Away Flying Lead Features: - Color code: Green
- For use with RapidRun™ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue)
- The perfect solution for running S-Video and dual channel audio to a single location
- SplitLok™ precision-machined 24-karat gold-plated terminations with split center pins guarantee a superior connection
- Ideal for use with receivers, projectors, HDTVs, computers, and any application where an S-Video and dual channel audio signal is desired
| Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.
|
|
|
|
|
RAPIDRUN™ COMPONENT VIDEO + S/PDIF DIGITAL AUDIO WALL PLATE (White)
RAPIDRUN™ COMPONENT VIDEO + S/PDIF DIGITAL AUDIO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run | Product Features | Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile!
RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.
The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate.
RapidRun™ Component Video + S/PDIF (4-RCA) Break-Away Wall Plate Features: - Color code: Blue
- For use with RapidRun™ HT (5-Coax) Runners (color code blue)
- Supports transmission of component video and digital coaxial audio over a single run, providing two connections in one!
- Fits into a standard J-box
- Compatible with Decora® brand cover plates Click here for wallplates
- Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a component video and digital audio signal are desired in a single cable run
Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.
|
|
|
|
|
