RAPIDRUNâ„¢ COMPONENT VIDEO + S-VIDEO BREAK-AWAY FLYING LEAD (1 Foot)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a S-Video and component video signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRunâ„¢, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun'sâ„¢ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runnerâ„¢ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRunâ„¢ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Awayâ„¢ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runnerâ„¢ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRunâ„¢ Component Video (3-RCA) + S-Video Break-Away Flying Lead Features: Color code: Blue For use with RapidRunâ„¢ HT (5-Coax) Runners (color code blue) Supports transmission of component video and S-video over a single run, providing two connections in one! Nickel plated outer connector provides a robust, highly conductive connection Fully overmolded for additional strain-relief Ideal for use with receivers, projectors, HDTVs, computers, and any application where both a S-Video and component video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

Python RCA Component Video Cable (3 x RG59)

Python Brand High-Definition RCA Component Video Cable  

• 3ea. RG59 conductors with 95% copper braid
• Rubberized flexible jacket
• 24K Gold-Plated Connectors
• Fully-molded RCA Connectors
• 75-Ohm impedance, extended 1GHz bandwidth
• EMI-RFI Protected Double High-Density Shield. 100% 0.12mm Aluminum-Polyester Foil Shield
• Low-Attenuation Foamed Cellular Dielectric.
• 24K Gold Plated Heavy Duty RCA Connectors.
• Color Coded - Fully Molded Construction.
• Transfer signal from DVD Players and High-End TV's or monitors for optimum picture resolution5-210-003 25-210-006 25-210-012 25-210-025 25-210-050 25-210-075 25-210-100

AVT-3800 imageMAX PLUS Video Scaler

imageMAX PLUS is a high performance Video Scaler for up-converting standard analog video for viewing on virtually any HDTV, Plasma, Digital or PC Display. 

ImageMAX can transform your existing standard video from a DVD Player, VCR, Camcorder, Video Game, Satellite Receiver or virtually any other video source into a high quality picture on any display device with an RGBHV (PC-type) or YPbPr (3 RCA connectors) input.  It even works with HDTV-ready TV Sets, resulting in dramatically improved video image quality.

Component Video Cable with Toslink Audio 

Python Brand High-Definition RCA Component Video Cable w/Toslink Audio 

• HDTV Compatible
• 3ea. RG59 conductors with 95% copper braid
• Rubberized flexible jacket
• 24K Gold-Plated Connectors
• Fully-molded RCA Connectors
• 75-Ohm impedance, extended 1GHz bandwidth
• Transfer signal from DVD Players and High-End TV's or monitors for optimum picture resolution

Python Component Video-Audio Cable (5 X RG59) Extended Distance

Python Brand High-Definition RCA Component Audio/Video Cable

• 5ea. RG59 conductors with 95% copper braid
• Rubberized flexible jacket
• 75-Ohm impedance, extended 1GHz bandwidth
• Transfer signal from DVD Players and High-End TV's or monitors for optimum picture resolution
• EMI-RFI Protected Double High-Density Shield. 100% 0.12mm Aluminum-Polyester Foil Shield
• Low-Attenuation Foamed Cellular Dielectric.
• 24K Gold Plated Heavy Duty RCA Connectors.
• Color Coded - Fully Molded Construction.
  

Component Video Coupler

• Gold plated triple RCA coupler.
• This female to female triple coupler can be used to join two stereo A/V, component video or RGB cables.
• It can also be used as a gender changer.

3-Way AUDIO/VIDEO Switch Box

• Select up to three inputs
• Switches both the stereo audio and video signal inputs to a parallel output
• parallel output is designed for simultaneous viewing and recording
• Gold plated RCA jacks and low profile slide switch

You might also need: Triple RCA Patch Cables

Ironman 3 BNC - 3 BNC Component Video Cable (HDTV)

• Connectors: 3ea. BNC Male - BNC Male
• 3ea. RG59 conductors with 95% copper braid
• Rubberized flexible jacket
• 24K Gold-Plated Connectors
• Fully-molded RCA Connectors
• 75-Ohm impedance, extended 1GHz bandwidth

XBOX® COMPATIBLE S-VIDEO/COMPOSITE VIDEO INTERCONNECT WITH STEREO AUDIO

Experience the full power and excitement of your video game's images and sound!

Product Features

Video Game Console Interconnects by ShowMeCables are the ideal combination of performance and beauty. These unique interconnects will connect S-Video or Composite Video to any high-performance display and audio system. Enjoy the ultimate video experience from your gaming system on any standard-definition television or monitor. Oxygen-free copper conductors incorporate an impervious dual shielding system to protect delicate signals from destructive EMI and RFI. A foamed polyethylene dielectric maintains critical cable geometry while delivering a near-perfect insular property, close to that of air. Two twisted-pair audio cables eliminate common-mode noise and provide the most detailed stereo audio experience you've ever heard. The unique hybrid connector provides the reliability of an assembled connector with the strain relief of a molded connector. Extended length cables put your gaming console where it belongs-- right next to you! Experience the full sound and image you've paid for--hook up your system for hot, hot performance

Component Video S-Video Adapter for In-focus X1 Projector

Video Adapter for InFocus LP500, LP530, X1, SP4800 Projectors

• Connectors: S-Video male to 3ea. RCA Female (RGB - Red, Green Blue)

4-Way Component Video Distribution Amplifier

Industries First Low-Cost, Component, (Y, Pr, Pb) Video Distribution Amplifier, Model AV 400COMP High Performance, Low Distortion, True One-to-One Ratio.

Key Features
• No signal loss
• low distortion
• True one-to-one ratio
• Unity gain & Cascadable
• Metal housing reduces interference
• Save the expense of additional digital receivers
• Improves display picture quality
• Loop or cascade to unlimited number of televisions with equal picture quality
• Allows up to 150ft. runs

RAPIDRUNâ„¢ COMPONENT VIDEO + S-VIDEO WALL PLATE (White)
Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and component video signal are desired in a single cable run

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun™ Component Video (3-RCA) + S-Video Break-Away Wall Plate Features: Color code: Blue For use with RapidRun™ HT (5-Coax) Runners (color code blue) Supports transmission of component video and S-video over a single run, providing two connections in one! Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with receivers, projectors, HDTVs, computers, and any application where both an S-Video and component video signal are desired in a single cable run Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.