(5) BNC PLENUM-RATED COMPONENT Audio/Video Cable
  Use when you install video systems in commercial environments

Product Features

Plenum-rated Component Video RGBHV Cables are designed to meet stringent building codes for placement of low voltage wiring within a commercial building. The air space above a suspended ceiling or plenum is a common location for runs of low voltage cables. Placement of low voltage cables within the plenum require the installer to use materials that limit the release of smoke and fumes in the unfortunate event of a fire. These plenum-rated component video cables are constructed from five precision-machined 75Ohm coaxial cables. They use our precision-machined BNC connectors for a solid and reliable connection. CMP-rated PVC jacket and Teflonâ„¢ inner insulators provide the fire protection required to run these cables within walls and air plenums without the need for conduit. The coaxial cables feature 26AWG tinned copper center conductor covered by aluminum polyester tape and 92% tinned copper braid for 100% shield coverage. Features: UL Listed, CMP-rated cable jacket FEP, Teflonâ„¢ inner insulation 26AWG center conductors 92% tinned copper braid shield over foil shield Precision-machined BNC connectors

RAPIDRUNâ„¢ RGBHV (5-BNC) WALL PLATE (White)
Ideal for use with computers, projectors, and any display requiring a 5-BNC connection

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun™, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun™ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away™ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner™ base cable through a 3/4in conduit then terminate with your flying lead or wallplate. RapidRun™ RGBHV (5-BNC) Break-Away Wall Plate Features: Color code: Green For use with RapidRun™ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue) Supports transmission of RGBHV component video signals or component video and stereo analog audio Fits into a standard J-box Compatible with Decora® brand cover plates Click here for wallplates Ideal for use with computers, projectors, and any display requiring a 5-BNC connection Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RAPIDRUNâ„¢ RGBHV (5-BNC) BREAK-AWAY FLYING LEAD (1 Foot)
Ideal for use with computers, projectors, and any display requiring a 5-BNC connection

Product Features

Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRunâ„¢, you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun'sâ„¢ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runnerâ„¢ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRunâ„¢ is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Awayâ„¢ Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runnerâ„¢ base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRunâ„¢ RGBHV (5-BNC) Male Break-Away Flying Lead Features: Color code: Green For use with RapidRunâ„¢ PC/Video (UXGA) Runners (color code yellow) or RapidRun HT (5-Coax) Runners (color code blue) Supports transmission of UXGA and component video signals Nickel plated outer connector with gold-plated pins provide a solid, highly conductive connection Ideal for use with computers, projectors, and any display requiring a 5-BNC connection Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

Ironman SVGA - 3 RCA Component Video Cable (HDTV)

VGA to 3x RCA Component breakout cables are used with video sources or displays that have dual-signal (VGA or Component) Input/output such as scalers and some digital projectors/plasmas.  Our premium-grade cables provide performance at affordable price. 

Please note that breakout cables cannot transcode video signals from VGA to/from Component and can be used in the below instances:Video output device with VGA connector output VGA/Component signal. Video projector/Plamsa VGA input can accept both VGA/Component signal.

• Connectors: HDD15 Male (SVGA/VGA) - 3ea. RCA Male
• 3ea. RG59 conductors with 95% copper braid
• Rubberized flexible jacket
• 24K Gold-Plated Connectors
• Fully-molded RCA Connectors
• 75-Ohm impedance, extended 1GHz bandwidth

  25-155-006 25-155-012 25-155-025

Extended Distance SVGA - 3 RCA Component Video Cable (HDTV)

VGA to 3x RCA Component breakout cables are used with video sources or displays that have dual-signal (VGA or Component) Input/output such as scalers and some digital projectors/plasmas.  Our premium-grade cables provide performance at affordable price. 

Please note that breakout cables cannot transcode video signals from VGA to/from Component and can be used in the below instances:Video output device with VGA connector output VGA/Component signal. Video projector/Plamsa VGA input can accept both VGA/Component signal.

• Connectors: HDD15 Male (SVGA/VGA) - 3ea. RCA Male
• 3ea. RG59 conductors with 95% copper braid
• Rubberized flexible jacket
• 24K Gold-Plated Connectors
• Fully-molded RCA Connectors
• 75-Ohm impedance, extended 1GHz bandwidth